Oxva NeXLIM Replacement Pod 3/PK

Unlike standard single-mesh pod coils, each NeXLIM pod uses two integrated mesh coils that heat your e-liquid from a larger surface area. This dual-coil design produces noticeably richer flavour and denser vapour compared to older OXVA pod designs. In Boost mode on the NeXLIM device, both coils fire simultaneously for maximum intensity. In Eco mode, they alternate to extend pod and battery life.

OXVA engineered these pods with Unitech 2.0 wicking technology and a 5-layer leak-proof structure that significantly extends coil life. Each pod supports more than 15 refills before flavour begins to degrade, which is roughly double the lifespan of most competing pod cartridges. At 4mL per fill, that translates to 60mL or more of e-liquid per pod.

The 4mL pod capacity is larger than most pod systems on the market and reduces the frequency of refills throughout the day. The top-fill silicone stopper provides mess-free refilling without removing the pod from the device. The clear PCTG body lets you monitor e-liquid levels at a glance.

Choose from 0.6 ohm for restricted direct-to-lung (RDL) vaping with bigger clouds, 0.8 ohm for a versatile all-rounder between MTL and RDL, or 1.2 ohm for a tight mouth-to-lung (MTL) draw closest to a cigarette-style experience. All three resistances use the same dual mesh coil platform.

OXVA's 5-layer anti-leak construction creates multiple barriers between the e-liquid chamber and the airflow path. This keeps your device clean and your pockets dry, even when carrying the NeXLIM horizontally in a bag or pocket throughout the day.

Each pack includes three replacement pods at your chosen resistance. At 15+ refills per pod, a single 3-pack can last over a month of regular use depending on e-liquid sweetness and usage frequency. Fruit and menthol e-liquids tend to extend coil life, while very sweet dessert profiles will reduce it.

No. NeXLIM pods are designed exclusively for the OXVA NeXLIM device. They are not compatible with the XLIM Pro 3, XLIM GO 2, or any other OXVA XLIM kit. Similarly, XLIM pods (V2, V3, EZ) do not fit the NeXLIM. The two pod systems use different form factors and are not interchangeable.

OXVA rates each NeXLIM pod for 15+ refills, which translates to roughly 60mL of e-liquid per pod. In practice, lifespan depends heavily on your e-liquid. Fruit and menthol flavours tend to be gentle on coils and can reach 15+ refills. Very sweet dessert and custard profiles contain more sweetener, which gunks coils faster and may reduce lifespan to 8-12 refills. When flavour starts tasting muted or you catch a slight burnt note, it is time to swap the pod.

No. NeXLIM pods use built-in (integrated) dual mesh coils. When the coil reaches the end of its life, you replace the entire pod cartridge. This design allows OXVA to optimize the coil-to-pod seal for better leak resistance and consistent performance, but it does mean the pod and coil are one unit.

Start with the 0.8 ohm if you are unsure. It is the most versatile option, working well for both MTL and light RDL vaping with 50/50 nic salt at 10-20mg. Choose 1.2 ohm if you want the tightest, most cigarette-like draw with maximum battery efficiency. Choose 0.6 ohm if you prefer warmer, denser clouds with an open, airy draw. The NeXLIM kit comes with a 0.6 and 0.8 ohm pod included, so you can try both before buying replacement packs.

50/50 VG/PG nicotine salt at 10-20mg is the ideal pairing for all three resistances. The 0.6 ohm pod can also handle 60VG/40PG blends. Avoid anything above 70VG, as thick liquids will not wick properly in pod-style coils and will cause dry hits. Freebase e-liquid at 3-6mg also works, particularly in the 0.6 ohm pod for a direct-to-lung style. Browse our e-liquid collection for compatible options.

Eco and Boost are power modes on the NeXLIM device, not the pod itself. Both modes use the same dual mesh pod. In Boost mode, both mesh coils fire simultaneously for maximum flavour and vapour. In Eco mode, the coils alternate to conserve battery and extend pod lifespan. You can switch between modes on the device regardless of which pod resistance you use.

Replace the pod when you notice any of these signs: flavour tastes muted or dull compared to when the pod was fresh, you detect a slightly burnt or off taste even with a full pod, vapour production has noticeably decreased, or the e-liquid appears darker than usual inside the pod (indicating burnt residue). Running a worn-out coil will not improve and will only make the experience worse.